Patio Heater

All Weather Wicker Patio Heater 27995 Patio Heater

Patio Heater – Constantly begin with the simplest reasons and also work down the list. Among the most common mistakes is to misdiagnosing a pilot with a clog and also drilling a tiny opening to deal with the trouble! Never pierce the pilot burner, as soon as the hole has actually been drilled the heater will imitate a fire thrower and also is a write-off!

First examine the gas cylinder has gas and also is activated. This might be apparent yet it can be difficult to compute just how much gas remains in the cylinder. Take the LPG pipe of the regulator and also turn the gas on for 2 to 3 seconds (no longer) outdoors and also far from any kind of naked flame and also do not smoke while making any kind of repair works. If you could scent and also hear gas them the cylinder has gas.

To examine if the ignitor functions just press the piezo red button and also location your thumb on the various other end. You need to feel a sharp sting and also hear it click, if not then the ignitor needs replacing. These are very easy to change, just draw the ignitor lead off the back of the ignitor and also loosen to eliminate. Replace with a brand-new ignitor.

The very first consumable component to use is a thermocouple, these could last anywhere between 1 year if you are unlucky and also as much as 6 years depending on the use of the patio heater, storage space and also type. Transforming the thermocouple solutions 90% of all shooting troubles. An easy means to exercise what the parts appear like and also ways to fix them is to view patio heater thermocouple on the patio heater to get a suit to your kind of patio heater.

Next off on the consumables list is the electro-magnetic valve. If a brand-new thermocouple hasn’t already repaired the illumination trouble take a look at the electro-magnetic valve. This rests inside the gas control valve and also is accessed by unscrewing the bolt that holds the electro-magnetic valve in position. When altering constantly use plumbings tape to reseal joints and also before lighting the heater contact a leak examination. This is done by using a soap service of one component fluid detergent (washing-up fluid) and also one component water. The soapy service is applied to the joints using a tidy spray bottle or tidy paint brush. Turn the LPG gas supply on yet do not light the heater. Ensure the safety and security control valve on the heater remains in the OFF position. If a leak exists, switch off the LPG gas supply. Tighten up any kind of installations and also re-test. Continue examining until all leaks and also connections are tighten according the manufacturer’s instructions.

Third consumable component is a tilt button. These could create similar shooting troubles to imitate a used thermocouple. Straightforward to change on most patio heater, these are attached using 2 leads that push on to the tilt button. Simply unclip and also swap for a brand-new tilt button. On some models the tilt button is soldered on using 2 leads, if your patio heater tilt button has actually been soldered you will should readjust accordingly.


Leave a Reply

Your email address will not be published. Required fields are marked *